Electrolux WM 1200 A - Manual (Page 7)

7
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you wish to carry out the extra prewash, pour
detergent into the compartment marked
.
P0876
P0004
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
4. Select the required option(s)
Depress HEAVY SOIL and/or QUICK WASH and/or
SUPER RINSE and/or FULL RINSE HOLD button, if
required.
5. Select the required programme
Turn the programme selector dial clockwise to the
programme B.
B
M0043
H E AV Y
S O I L
Q U I C K
W A S H
S U P E R
R I N S E
FULL
RINSE HOLD
P0877