Cut the ceiling, 202 mm – EverFocus SPEEDDOME EPTZ3000 User Manual
Page 24
2-23
RELAY
JP5
V
ideo +
V
ideo -
R
S
4
85 +
R
S
4
85 -
AC
2
4
AC
2
4
Cut the ceiling
Note: Please notice the polarity of control line. The EPTZ3000I will not work if the polarity
of control line is mis-connected.
6. Align the two screw holes on the bottom of mechanical part to the two bolts on the
base of the housing, and twist the mechanical part clockwise a little bit in order to
engage it with the base. Screw the two bolts on the base, and then connect and fix the
connection bus to the PCB board on the mechanical part.
202 mm