Eiki 8080 - Manual (Page 16)

16
Listening to a Tape
1
Load a cassette tape.
1
Press the [STOP/EJECT]
button to pop open the cas-
sette holder.
2
Insert a tape so that the
side you want to record will
face up and the exposed
tape will face toward you.
3
Close the cassette holder.
2
Press the [PLAY] button.
Adjust the volume level.
CAUTION:
• The [CD/USB] Input Select switch can be set to either [CD] or [USB].
• When tape playback starts, CD or USB playback will stop.
• During tape playback, you cannot play a CD or files on the USB flash drive.
Press the [STOP/EJECT] button.
Press the [STOP/EJECT] button again to eject the cas-
sette tape.
Press the [PAUSE] button.
Press the [PAUSE] button again to resume play-
back.
Press the [REWIND] or [FF] button respec-
tively.
Press the [STOP/EJECT] button at the
desired position.
CAUTION:
• Before you press any tape transport button, press
the [STOP/EJECT] button to stop the tape.
• When the tape reaches the end, the automatic stop
mechanism will stop the transport operation and the
button that has been depressed will return to its orig-
inal position. Do not press the button again.
DIGITAL DISPLAY
REPEAT 1ALL REMAIN
TRACK NO. TIME
MIN. SEC.
RANDOM
PROGRAM
MEMORY
AUTOMATIC STOP
2 x COUNTER
PUSH
OPEN
VARIABLE PITCH CONTROL
25 RANDOM ACCESS PROGRAM
2 x COUNTER
2 1
■ About the tape counter
The tape counter indicates the
approximate amount of tape
transport.
Press the counter reset button to
reset the counter to “000.”
tape counter/counter reset button
Place the tape
on top of the
guides.
Stopping the tape playback
Pausing the tape playback
Rewinding or fast forwarding the tape