Epson B 310N - Manual (Page 155)

Troubleshooting 155
❏
If you are printing on glossy media, place a support sheet (or a sheet of plain paper)
beneath the stack, or load only one sheet at a time.
❏
Do not touch or allow anything to come into contact with the printed side of paper with
a shiny finish. To dry your printouts, follow the instructions on the sheet packed with the
paper.
❏
Run the Head Cleaning utility.
& See “Cleaning the Print Head” on page 131.
Ink Bleeds Through the Page
❏
Use the Print Saturation Adjustment feature to reduce the amount of ink on the page
and increase the drying time if necessary.
& See “Special Settings for Automatic Double-sided Printing (Using the Duplex Unit)”
on page 56.
❏
Adjust the ink levels in the photo image.
Miscellaneous Printout Problems
Incorrect or Garbled Characters
❏
Turn off the printer and computer. Make sure the printer’s interface cable is securely
plugged in.
❏
Clear the print job from the print queue.
❏
Uninstall the printer driver, then reinstall it.
& See “Uninstalling the Printer Software” on page 16.
Incorrect Margins
❏
Confirm the margin settings in your application. Make sure that the margins are within
the printable area of the page.
& See “Printable Area” on page 171.
❏
Make sure the printer driver settings are appropriate for the paper size you are using.
For Windows, confirm the settings in the Main Window.