Roth AV Sub Zero II : TV Soundbar with Bluetooth APT-X - Manual (Page 14)

14 | Roth SUB ZERO II User Manual
Sub Zero II
TV Soundbar with bluetooth APT-X
Sub Zero II Specifications
input Sources
• Bluetooth
• Line-in (3.5mm)
• Optical
• Aux (RCA)
Bluetooth
• A2DP audio using either SBC & Apt-x decoders
line-in
• 3.5mm stereo mini-jack
• 500 mV RMS full scale input
Aux-in
• RCA input
• 500 mV or 2V RMS full scale input TBD
Optical
• SPDIF format
• Toslink compatible
• Stereo only
• Up to 96 KHz sample rate at up to 24 bit PCM data
Amplifiers
• Class-D power-stages.
• 2x10W capability@<10% THD+N
• 2x20W capability@<10% THD+N
Signal Processing
• NCPA 110P AE Engine DSP
AC Power
• External 19V 3.42A (65W) 220/110 AC input
keys
• Power
• Source
• Vol+
• Vol-
• Mode
Power
• Source
• Vol+
• Vol-
• Mode
indicators
There are 7 LEDs on the front panel as follows:
1. Power LED
- Standby, LED is GREEN
- Normal operation, LED is PURPLE
2. Source LED (RGB LED)
- Line-in, LED is RED
- AUX in, LED is GREEN
- Optical operation, LED is WHITE
- Bluetooth operation, LED is BLUE
3. 5 x Volume LEDs (BLUE)
- LEDs will display the current volume level (20 teps)
- Volume is at zero all LEDs will flash to indicate muting
general
• Operating Temperature: 5˚C - 40˚C (32°F ~ 104°F)
• Power Requirements: AC 230 - 240V ~ 50Hz
• Power Consumption: 65W
All specifications, features and dimensions are subject to
change without notice.
“A film is - or should be - more like music than like fiction. It should be a progression of moods
and feelings. The theme, what’s behind the emotion, the meaning, all that comes later. ”
- Stanley Kubrick
Roth Sub Zero II Manual UK EM.indd 14 11/10/2013 10:12