Rose Electronics VGA to DVI Converter - Manual (Page 8)

INSTALLATION
4 Installation and Operations Manual
Installing the VGA to DVI converter / scaler
Installation of the VGA to DVI converter/scaler is a very easy process.
1. Connect a VGA cable from the VGA source to the VGA In connector.
2. Connect a DVI cable between the DVI Out connector and the DVI
display.
3. Connect the 5V DC power adapter to the VGA to DVI converter / scaler,
then connect the AC power cord from the power supply to an available
electrical outlet. The power LED will turn red indicating that the unit is
powered.
4. Power-on both the VGA source and the DVI display.
Figure 1. Connectivity Diagram
NOTE: The VGA to DVI Converter / Scaler provides an auto-adjust (auto-sync)
feature each time the VGA source is connected to the unit. The VGA to DVI
Converter / Scaler will also perform an auto-adjust during a hot-plug event, a power-
cycle event, or if the VGA source resolution is changed.
VGA computer or VGA source
VGA mm cable
DVI cable
DVI Video monitor