Rose Electronics Remote Control Keypad - Manual (Page 6)

INTRODUCTION
Disclaimer
While every precaution has been taken in the preparation of this manual, the
manufacturer assumes no responsibility for errors or omissions. Neither does
the manufacturer assume any liability for damages resulting from the use of
the information contained herein. The manufacturer reserves the right to
change the specifications, functions, or circuitry of the product without notice.
The manufacturer cannot accept liability for damages due to misuse of the
product or other circumstances outside the manufacturer’s control. The
manufacturer will not be responsible for any loss, damage, or injury arising
directly or indirectly from the use of this product.
System introduction
Thank you for choosing the Rose Electronics

Remote Control Keypad
. The
Remote Control Keypad is a unique product that allows you to simplify the
repetitive keystrokes, words, phrases, or commands that you use every day
into a single key. Assign your name to a key and every time you need to type
it into a document, simply press that key.
The Remote Control Keypad is available in a 4 x 5 key or 1 x 16 key model.
All models are available with PS/2 or USB connectors. The PS/2 models
work in conjunction with your PS/2 keyboard. No installation or configuration
is needed. The USB model connects to any unused USB port. It requires the
installation of MMII software which provides additional features not available
with the PS/2 models.
Features
 Available in a 4 x 5 button model or 1 x 16 rail, USB or PS/2 models
 Dual level programmable, program one key to toggle between levels and
all other keys can be programmed to perform two different functions
 Connects in-line with a standard PS/2 keyboard or USB port
 Replace any keyboard sequence like a word, phrase, or command with a
single key
 Works on any piece of equipment that uses standard PS/2 or USB
keyboard inputs commands like computers, KVM switches, extenders,
etc.
 Compatible with all operating systems
 Easy to install and program
 Keys have a removable keycap for custom key labeling
 Can be used as a stand-alone bootable keyboard
 Programming each key is a simple as pushing a key, type a phrase, push
the key again and that key is programmed
 USB installation software included