Evolution Technologies MK-449C - Manual (Page 9)

Evolution MK-425C/449C/461C Advanced User Guide
8
Note: For a detailed description of RPN/NRPN data see section RPN/NRPN’s
Explained
on page 12.
1.
Select the desired control as described earlier.
2.
Press “CONTROL ASSIGN” twice and while the display is
flashing, enter controller 132 for RPN coarse, 133 for RPN
fine, 134 for NRPN coarse or 135 for NRPN fine.
3.
Press “DATA MSB” twice to assign the number for
the RPN/NRPN MSB.
4. Press DATA LSB twice to assign the number for
RPN/NRPN LSB.
5.
Press “CHANNEL ASSIGN” to assign the MIDI channel the
message should be sent on.
You will find most data sheets for synths that make use of NRPN’s will give the MSB
and LSB values that you should enter into DATA MSB and DATA LSB banks
(also see
Appendix F). However, some manuals may only give the hex values.
The MK-425C/449C/461C requires you to enter the decimal value. You can easily
convert hexadecimal values to decimal using the windows calculator. Simply select
Scientific mode, select hex and enter the hexadecimal value you need to convert.
Press the Dec button to convert it to a decimal value.
Alternatively, use the look up table in Appendix C.
Assigning RPN/NRPN To A Fader/Rotary Controller
21
Evolution MK-425C/449C/461C Advanced User Guide
Appendix B - Assignable MIDI CC’s
on the MK-425C/449C/461C
B1 - The Faders and rotary Controllers:
MIDI CC Description Data Lsb (Press
Twice)
Data Msb (Press
Twice)
0-119 Standard MIDI CC’s - -
120-127 Channel Mode Messages - -
128
Pitch Bend Sensitivity - -
129
Channel Fine Tune - -
130
Channel Coarse Tune - -
131
Channel Pressure - -
132
RPN coarse RPN LSB RPN MSB
133
RPN fine RPN LSB RPN MSB
134
NRPN coarse NRPN LSB NRPN MSB
135
NRPN fine NRPN LSB NRPN MSB
136
Master Volume GM* Volume LSB Volume MSB
137
Master Pan GM* Pan LSB Pan MSB
138
Master Coarse Tune GM* Tuning LSB Tuning MSB
139
Master Fine Tune GM* Tuning LSB Tuning MSB
140
Chorus Mod rate GM2* Mod rate -
141
Chorus Mod Depth GM2* Mod depth -
142
Feedback GM2* Feedback level -
143
Send to Reverb GM2* Reverb send level -
144
Pitch Bend Pitch shift LSB Pitch shift MSB
255 Controller Off*** - -
* Sysex messages - for details please see pages 12 & 13.
** MMC Sysex messages, for details please see page 7.
*** This value cannot be typed in using the numerical keypad. Type in 144 and
then press the + button to set this value.