Rose Electronics Video Splitter DVI+Audio - Manual (Page 3)

Specifications –
Video Signal DVI-D (digital)
Number of Ports 1-Input 4-output (DVI-D Video + Analog audio)
Connectors 1 x DC Power
5 x 24-pin DVI-I
5 x 3.5mm mini-jack
LEDs
1 x Power/Input
4 x Output Link
Maximum Video
Resolution 1920x1200@60Hz / 1080p
Maximum Distance 33 ft (10m)
Maximum Video
Bandwidth 350MHz
Power Adapter 9VDC, 600mA, center positive
Operating Temp 32°F ~ 104°F (0°C ~ 40°C)
Storage Temp -4°F ~ 140°F (-20°C ~ 60°C)
Humidity 0 ~ 80% RH
Dimensions Width Depth Height
8.66in 5.31in 1.73in
220.0mm x 135.0mm x 44.0mm
Weight 2.43lbs (1.10kg)
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.