Rose Electronics CrystalLink USB 2.0 CATx - Manual (Page 6)

Application Examples
The CrystalLink USB2.0 extender is ideal for use in office or industrial environments, or in computer room
environments, where two or more USB devices need to be connected at short distances away from a host
PC.
 Interactive Whiteboard  Board-room presentations
 Office device extension. Printer or Scanner  Keyboard or Mouse extension
 Industrial control  Computer room – Server management
 Sensor/Data Acquisition  Temporary office relocations
 Web camera operation  Remote hard drive and flash drive
Package Contents
 Transmitter Unit
 Receiver Unit
 AC Power Adapter (1)
 One USB-AB (6ft) cable
 Installation & Operation Guide
Additional Installation Items (not included in the package)
 USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant Operating System
 USB 1.1 or 2.0 compatible device(s) for remote-end connection
 CATx Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling),
or CATx cabling with two information outlets and two CAT5ee patch cords with RJ45
connectors (if using premise cabling).
 For optimum performance, the CATx cable should be run straight and not coiled, and not
routed close to electrical cables. Pin cables according to T568A/T568B.
All references to CATx cable in this document refer to solid-core cable (CAT5e UTP or better) and
represents the minimum CATx specification requirements. CAT6 or shielded (STP) cables may be
substituted. Use of CATx patch-cables will reduce the recommended cable extension distances.