Rose Electronics UltraMatrix Remote 2 - Manual (Page 60)

54 ULTRAMATRIX REMOTE 2 INSTALLATION AND OPERATIONS MANUAL
Misc.
Shared (don’t disconnect other viewers)
This feature is restricted to software server versions of VNC and has no
effect on UltraMatrix Remote 2 unit installations.
Render cursor locally
This feature is restricted to software server versions of VNC and has no
effect on UltraMatrix Remote 2 unit installations.
Fast CopyRect
This feature is restricted to software server versions of VNC and has no
effect on UltraMatrix Remote 2 unit installations.
Appendix I – Supported Video Modes
The following video modes are supported and can be automatically configured by the UltraMatrix Remote 2. If a
recognized video mode cannot be found, the UltraMatrix Remote 2 will gradually change some of the key parameters
to discover whether a video lock can be achieved. Support for VESA GTF (Generalized Timing Formula) is available
and can be enabled via the Advanced Unit Configuration screen.
The half width video modes capture every other pixel. These are not generally recommended for normal use but may
be used for emergency access to high resolution, high frequency system screens. Half width screens can be expanded
to normal width using the scaling features of the viewer.
vesa 720 x 400 @ 85Hz
vesa 640 x 480 @ 60Hz
vesa 640 x 480 @ 72Hz
vesa 640 x 480 @ 75Hz
vesa 640 x 480 @ 85Hz
vesa 800 x 600 @ 56Hz
vesa 800 x 600 @ 60Hz
vesa 800 x 600 @ 72Hz
vesa 800 x 600 @ 75Hz
vesa 800 x 600 @ 85Hz
vesa 1024 x 768 @ 60Hz
vesa 1024 x 768 @ 70Hz
vesa 1024 x 768 @ 75Hz
vesa 1024 x 768 @ 85Hz vesa 1152 x 864 @ 75Hz
vesa 1280 x 960 @ 60Hz
vesa 1280 x 1024 @ 60Hz
vesa 1280 x 1024 @ 75Hz
vesa 1600 x 1200 @ 60Hz
vesa 720 x 400 @ 70Hz*
sun 1152 x 900 @ 66Hz
sun 1152 x 900 @ 76Hz
sun 1280 x 1024 @ 67Hz
apple 640 x 480 @ 67Hz
apple 832 x 624 @ 75Hz
apple 1152 x 870 @ 75Hz
* Not actually a VESA mode but a common DOS/BIOS mode