Primare SP33 av preamp - Manual (Page 8)

s P 3 3 u s e r g u i d e
configuring the settings
This page explains how to use the SP33 menus to configure the operation of your
SP33.
u s i n g t h e m e n u s
The SETUP MENU gives access to a series of
menus which allow you to customize different
aspects of the operation of the SP33.
To display the SETUP MENU
• Press @ on the front panel or SETUP on the
remote control.
To display a menu
•
Use the SELECTOR control on the front
panel or the A or V buttons on the remote
control to highlight the menu on the SETUP
MENU that you want to display.
• Press R on the front panel, or SELECT or
> on the remote control, to select it.
To change a setting
• Use the SELECTOR on the front panel or
the A or V buttons on the remote control to
highlight the setting you want to change.
• Press R on the front panel, or SELECT or
> on the remote control, to display a list of
the alternative values for the setting.
• Use the SELECTOR control on the front
panel the A or V buttons on the remote
control to step between the alternative values.
• Press R on the front panel, or SELECT on
the remote control, to select the highlighted
setting.
Alternatively, press @ on the front panel, or
RETURN or < on the remote control, to return
to the menu without changing the setting.
To edit an input alias
• Press SELECT to edit the name of the
source.
• Use < or > to select a character.
• Use A or V to edit it.
• Finally press R on the front panel or
SELECT on the remote control to finish.
To exit from the current menu
• Press @ on the front panel or RETURN on
the remote control.
Exiting from the SETUP MENU returns to
normal operation of the SP33.
i n P u t s e t t i n g
The INPUT SETTING menu allows you to
configure any of the 15 inputs.
•
Use the INPUT option to select the input
you want to edit.
The menu then shows the current settings for that
input and allows you to edit them.
Option Description
STATUS ENABLED or DISABLED to
specify whether the source can be
selected from the front panel or
remote control.
ALIAS See To edit an input alias on this
page.
AUDIO The audio input used for the
source: NONE, ANALOG 1 to
10, EXT 7.1, DIGITAL 1 to 7,
or HDMI 1 to 5.
TRIGGER 1-3 Can be set to ON or OFF, to
set the corresponding trigger, or
--- to take the value from the
CONTROL menu.; see Trigger
settings, page 11.
VIDEO The video input used for the
source: NONE or HDMI 1 to 5.
HDMI VIDEO
OUT The video output used for the
source: OUT 1 or OUT 2.
HDMI AUDIO Set to TV to pass the HDMI
audio to the TV, or SP33 to get
the SP33 to process the audio.
VOLUME
OFFSET Press < or > to vary the
sensitivity of the source between
-12.0dB to +12.0dB in 0.5dB steps.