Precision Medical Vac Trap - Manual (Page 6)

TROUBLESHOOTING
Problem Probable Cause Remedy
Float Stuck 1. Float neck dirty 1. Remove foreign
substance
No Suction 1. Leaking
connections
2. Suction Source
not turned “ON”
3. Jar full
1a. Check
connections &
reconnect
1b. Tighten Jar
2. Turn Suction
Source “ON”
3. Empty / clean jar
CLEANING
1. Unscrew the Jar.
2. Remove the Float Assembly.
Gas Sterilization:
Ethylene Oxide mixtures can be used at
temperatures up to 135° F. Follow the procedures
from the manufacturer of the sterilizer.
CAUTION
• Exceeding the recommended sterilization
temperatures may shorten the life of the Vac Trap.
• DO NOT autoclave.