Electrolux EDI97170W User Manual
Page 18
3. After a period of time, a patina due to de-
tergent residue on laundry forms on the
filters. When this occurs, clean the filters
with warm water using a brush. Remove
the filter from the door pulling it out. It can
be positioned with the tooth facing to the
left or to the right). After cleaning do not
forget to put it back.
4. Remove fluff from lint filter, preferably us-
ing a damp hand for this purpose.
5. Replace the filter.
Cleaning the water recirculation valve/
filter
If the
STEAM FILTER symbol is shown in
the display, the recirculation filter needs to be
cleaned. The valve/filter is placed behind the
tank handle - see chapter "Product descrip-
tion".
1. Push down the water tank’s filler neck (1)
and pull out it (2).
1
2
2. Clean the valve/filter under warm water.
3. Re-insert the valve/filter.
4. Turn the valve/filter in ON position.
Clean the door seal
Wipe the door seal using a damp cloth im-
mediately after the Iron Aid or drying cycle.
Emptying the condensed water
container
Empty condensed water container after ev-
ery drying cycle. If the condensed water con-
tainer is full, an active programme will break
off automatically and the
icon display will
18 electrolux