Mirage Omnican OC-65 - Manual (Page 3)

PRODUCT / HOLE CUT-OUT DIMENSIONS
PRODUCT DIMENSIONS: HOLE CUT-OUT DIMENSIONS:
PAINTING THE GRILLE AND THE BEZEL
If you wish, you can paint the grille and the visible frame of the OMNICAN to match the
décor and design of your home. Please take precautions to avoid any paint coming into
contact with the woofer cone, the tweeter, or the OMNIGUIDE module as this could
damage the speaker. Follow these simple steps to paint the speaker:
1) Separate the grille from the speaker.
2) The separated grille can now be painted on its own.
3) In order to paint the bezel, you should construct a protective cylindrical cover to slide
between the frame and the speaker (into the area where the grille is usually affixed). This
protective cover can be created by overlapping the ends of a piece of paper approximately
16-inches (40cms) long.
4) After the protective cover is set in place, paint the frame, and then remove the protective
cover when the paint is dry.
NOTE: Please do not paint the black components which are hidden
underneath the grille, as they can easily be damaged. These components
would also become more visible underneath the grille when painted a
lighter color. If any holes in the grille become filled with paint, find a small
sharp tool and carefully remove the paint before completing the installation.
o w n e r s m a n u a l
3
2.87”/73mm
OC-65 with back-box OC-65 without back-box
OC-55 with back-box OC-55 without back-box
OC-45
OC-65 OC-55
OC-45
Omnican(8.5x8.5)5:Layout 1 1/28/08 4:19 PM Page 3