Medal Sports 76025 - Manual (Page 2)

www.themdsports.com 76025-15 2 (Continued on the next page.)
Ladder Toss
ASSEMBLY INSTRUCTIONS
ITEM 76025-15
FIG.4
4. Press 2 vertical support grooved poles (#7) into the base “T” - connectors with tenon (#2). See Fig. 4 and 4A.
Make sure the groove of the vertical support poles matches the tenon of the base “T” - connector.
FIG.1
1. Press 2 base poles (#1) into both sides of the base “T” - connector with a tenon inside (#2). See Fig. 1.
FIG.2
2. Press the 2 elbow connectors (#3), 2 “T” - connectors (#5) and the 2 “T” - connectors with tenons (#6) into 3 support poles (#4)
as shown. See Fig. 2.
1 X 4
2 X 4
FIG. 1
Base pole
Base “T” - connector with a tenon inside
Press base poles into the connectors
1 1
2
X 4 3
4 X 6
5 X 4
6 X 4
FIG. 2
3
3
5
5
6
6
4
4
4
FIG.3
3. Insert the vertical support grooved poles (#7) into the plastic panel (#8) as shown. See Fig. 3 and 3A.
FIG. 3 7 X 4
8 X 2
7
8
7
FIG. 3A
8
7
Base “T” - connector
with a tenon inside
FIG. 4
2
FIG. 4A
7
7