Medal Sports 78201 - Manual (Page 4)

4
ASSEMBLY INSTRUCTIONS
BADMINTON SET
ITEM 78201-14
FIG. 4
4. GUIDE ROPE ATTACHMENT
FIG. 3
3. TOP & BOTTOM CABLE ATTACHMENT
16
17
A. Run the loop of top cable with Pre- attached tension clip through the wheel of pulley cap. Attach to the hook
of locking net bolt for second guide rope. See FIG. 3B & See FIG. 3A.
B. Insert the bottom cable through the hook of locking net bolt for second guide rope, attached with locking
cord (#9) . See FIG. 3C.
C. Adjust the tension clip of Top Cable and the Locking Cord to tighter the net after the net is completely
assembled.
FIG. 3A
9
FIG. 3B
FIG. 3C
A. Attach the loop (knotted end) of guide rope (#16) & second guide rope (#17) to the hook of locking
net bolt. Rotate and tighten the locking net bolt, but with the hook facing up. See FIG. 4.
knot
Locking Net Bolt of
Guide rope
Locking Net Bolt of
Second Guide Rope
Top Cable
Bottom Cable
knot
Release the top hole by push
the button of locking spring,
insert the cable into the top
hole and then into the bottom
hole.