Medal Sports FH38410KX - Manual (Page 5)

FIG.1
FIG. 2
FIG. 1
4
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Billiard Table. The table will be assembled upside
down and then turned over on its legs once the assembly completed. This game table is heavy, and turning
it over will require at least four strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list
page.Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work
surface.
X 2
X 1 1
2
X 12
X 2 3
6
X 12 7
X 4 9
3. Attach the Legs (#2 and #3) to the Billiard Cabinet(#1) using three Bolts (#6) and three Washers (#7)
per leg. See FIG. 1.
4. Screw the Leg Levelers (#9) into the bottom of each leg.
FIG.2
5. Attach the End Leg Panel (#4) to the Legs using six Screws (#8) per Leg Panel. See FIG. 2.
X 12
X 2 4
8
2
3
3
9
2
1
6
6
7
7
A1
4
8