Medal Sports SH58101 - Manual (Page 8)

7
FIG. 8 & 9
11. Attach the Rim Assemblies (#17) and Rim Support Plates (#18) to the Backboard (#21) using the Bolts (#23),
washers (#22) and Nuts (#27). And then attach the Switch Sensor (#15) to the Backboard (#21) using the
Bolts (#23), washers (#22) and Nuts (#27). Make sure that you use washer on both sides of the backboard as
shown in FIG. 8.
12. Attach Electronic Scorer Face Plate(#30) to Backboard and connect with the Electronic Scorer(#14) using Bolts
(#29) as shown in FIG. 9.
FIG. 9
FIG. 8
23
22
5 1 7 1
15
17
23
22
21
27 22 8 1
27 22 8 1
14
29
30
TIME
VISITOR
HOME