Marshall Electronics CV200-MB / M - Manual (Page 8)

- 8 -
DIS ◀
OFF /ON ◀
DET WINDOW
SENSI TI VI TY
ESTI MATE
QUI CK ZOOM
MOTI ON OSD
TEXT ALARM
SI GNAL OUT
SYSTEM ◀
OFF /ON ◀
COM ◀
I MAGE RANGE
COLOR SPACE
FRAME RATE
CVBS
COLOR BAR
CAM TI TLE
RESET ◀
RETURN ◀
EXIT
IMOTION ◀
OFF /ON ◀
RANGE
FILTER
AUTO C
RETURN◀
9) PRIVACY : Set the range of privacy protection zone ◀
① BOX: The use of the privacy function to the Box mode
< OFF /ON > ◀
1] ZONE NUM : Select to the desired box
< 0~15 steps,
0 >
7. IMAGE
1) SHARPNESS : Set the basic brightness of display
< 0 ~ 10 steps,
5 >
2) GAMMA : Set the gamma value of display
< 0.45, 0.55, 0.65,0.75 /
0.55 >
3) MIRROR : Change the left and right position
< OFF /ON >
4) FLIP : Change the up and down position
< OFF /ON >
5) D – ZOOM : Set the magnification of display
< 1.0X~16.0X,
1.0X >
6) ACE : Auto adjust brightness mode
< OFF /LOW/MIDDLE/HIGH >
7) DEFOG : Compensate the fog
< OFF /ON > ◀
① MODE( AUTO /MANUAL)
② LEVEL(LOW/ MIDDLE /HIGH)
8) SHADING : Correct the differences between the display
brightness in lens curve
<
OFF /ON > ◀
① WEIGHT(0~100%), 100%
SETUP
MENU
6. DNR : < OFF/LOW/ MIDDLE /HIGH >
Set the display noise remove condition (AGC) at low luminance
4] AGC MARGIN : Set the level range of the Day&Night
judgment detection(margin)
< 0 ~ 20 steps,
10 >
5] DEL AY: delay the time from day to night
< LOW , MIDDLE, HIGH >
② COLOR : keep the display in color regardless of Day & Night
③ B/W : keep the display in black regardless of Day & Night
1] IR LED < OFF /ON>
2] ANIT-SAT: Adjust the IR brightness in B/W state
< 0 ~ 20 steps,
10 >
5. COLOR : < AWB /COLOR GAIN >
1) AWB
1]AUTO : auto accumulation mode
Automatically adjust the color in environmental change of
2,300 K ~ 2,800 K
2] AUTOext : Outdoor and special lighting tracking mode,
White detection for special lighting such as mercury Operating
range of 2,300 K ~ 2,800 K
3] PRESET : It is for finding the best WB in current surveillance area
Hold “ SET button” to activate, or fixed
4] MANUAL : Adjust color in manual
① C-TEMP : normal color temperature value
< 3000K, 5000K ,8000K>
② R-GAIN < 0 ~ 20 steps, 10 >
③ B-GAIN < 0 ~ 20 steps, 10 >
2) COLOR GAIN : Set the color value of display
< 0 ~ 20 steps,
10 >