Marshall Electronics CV620 - Manual (Page 2)

Marshall Electronics www.LCDracks.com
3. Lock the metal plate B on ceiling mounted hanger
※Caution:
* Please use the hanger that has obtained UL security approval.
* Please reserve the hole for the connecting wires of the camera.
4. Combine the metal plate A and the metal plate B
 Push the metal plate A up to the ceiling and then to the right to latch the metal
plate B.
 Fix with 3 M3 screws.
4. Instruction on DIP SWITCH Setting
ID Setting
4.3 Camera Address Selector
Setting
Function
Descriptions
0~7 ID 0~7
8~9 Reserved
4.4 System Switch
Setting Function Descriptions
DIP 1
RS-232C/RS-422 selector
OFF: RS-232C / ON: RS-422
DIP 2
Infrared signal output switch
OFF: Off / ON: On
DIP 3
Communication baud rate selector
OFF: 9600 / ON: 38400
DIP 4 Reserved
4.1 OUTPUT SWITCH 4.2 IR SELECT
Output Mode Setting