Marshall Electronics CV350-5XB - Manual (Page 2)

Setup Menu of 1080 HD-SDI 5X Auto Focus Camera
Design and specifications are subject to change without notice.
SETUP SUB MENU SUB MENU DESCRIPTION
AWB Controls the automatic adjustment of the light source's color temperature to 3,000°K ~ 8,000°K.
ATW Continuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within the range of
1900K to 11000K.
PUSH Color temperature will be manually adjusted by pushing the OSD button. Place the white paper in front of the camera when OSD button is pressed to obtain the
optimum result.
INDOOR Select this when the color temperature is between 4500K and 8500K.
OUTDOOR Select this when the color temperature is between 1700K and 11000K (Ex. Sodium light inclusion)
MANUAL BLUE, RED Select this to fine-tune White Balance manually. You can adjust the blue and red tone level manually.
BLUE: Adjust the blue tone of the image (0~31). RED: Adjust the red tone of the image (0~31).
INDOOR, OUTDOOR Select one according to the location of camera installation. Then, select one sub-mode from AUTO, MANUAL, SHUTTER, PRIORITY, IRIS PRIORITY, and BRIGHT.
AUTO IRIS and SHUTTER are controlled automatically.
MANUAL IRIS, GAIN, and SHUTTERf are controlled manually.
SHUTTER PRIORITY Manual SHUTTER and GAIN control with automatic IRIS control.
IRIS PRIORITY Manual IRIS and GAIN control with automatic SHUTTER control.
BRIGHT IRIS and GAIN can be controlled by control of BRIGHTNESS.
BRIGHTNESS MANUAL, 0~20 0~20: Adjust the screen brightness. MANUAL: BRIGHTNESS control is fixed, and give the exposure control priority to other resources.
IRIS AUTO, MANUAL, 0~20 0~20: Adjust the IRIS screen brightness. AUTO: IRIS controls exposure automatically but SHUTTER is fixed. MANUAL: IRIS control is fixed, and give the exposure
control priority to other resources.
AGC LIMIT 0~20 A function which controls the amplification/gain process automatically if the illumination falls under the usable level.
SHUTTER AUTO, MANUAL, 1/2~40K 1/2~40K: Adjust the SHUTTER speed. (1/2, 4, 8, 15, 30, 60, 90, 120, 150, 180, 250, 350, 500, 725, 1000, 1500, 2K, 3K, 4K, 6K, 10K, 20K, 30K, 40K)
DSS(SENS-UP) MANUAL, OFF~1/2 OFF~1/2: Adjust the level of DSS. (OFF, 1/30, 1/15, 1/8, 1/4, 1/2) When it is in low luminance condition, DSS can adjust the picture quality by maintaining the light
level.
FLICKERLESS OFF, ON Use this function when you experience picture flicker, this happens when there is a conflict with the installed lighting frequency.
AUTO Automatically adjusts the focus position.
MANUAL Manually adjusts the focus position when zoom is changed.
PUSH When this mode is enabled, it will automatically adjusts the focus position only when the zoom is changed.
ZOOM SPEED 0~7 Set the zoom speed.
TELE LIMIT X3~X60 Set the limit of the tele.
WIDE LIMIT X1~X2 Set the limit of the wide.
FAR END INFINITY, 2, 3, 5, 10M Set the distance limit for the far focusing. The lens moves to adjust the focus from the distance.
NEAR END 30CM, 1, 1.5, 2, 3, 5, 10M Set the priority distance limit for near focusing.
LENS INITIAL OFF, AUTO, ONE PUSH AUTO: The focus is automatically adjusted at the pre-set interval (01~07). ONE PUSH: The focus is re-adjusted when the OSD button is pushed over ONE PUSH.
USER PRESET This function is to set user defined zoom and focus position. Up to 32 preset position can be set with sub menu, USER PRESET, ACTIVE, SAVE, RESET.
WDR Enable user to view both object and background more clearly when background is too bright. Set the WDR-LEVEL (0~4).
BLC Enable a back light compensation feature.
SPOT Enables a user to select a desired area on a picture and view that area more clearly when background is too bright.
ACE GAIN Brightness correction of the dark image area. Adjust the GAIN level (LOW, MIDDLE, HIGH).
LEVEL Highlight the bright area with a masking box with a selected color. Adjust the masking level (0~20).
COLOR Select the color for masking (GRN, MAG, RED, BLUE, BLK, WHT, YEL, CYN)
D/N LEVEL The camera will stay in DAY in a normal environment, but switched to NIGHT mode when ambient illumination become this pre-set level.
This level is threshold for switching day to night. It is same as the exposure gain level.
MARGIN Set the margin between Day →Night switching level and Night →Day switching level. Different exposure gain level is needed to avoid malfunctions.
DWELL TIME Select the checking time of light condition to confirm to chage from the day mode to the night mode.
NIGHT BURST Night burst OFF makes that the color burst is removed when ICR switches to black/white.
DAY The picture is always displayed in color.
NIGHT NIGHT BURST The picture is always displayed in black/white.
D/N LEVEL The camera will stay in DAY in a normal environment, but switched to NIGHT mode when ambient illumination become this pre-set level.
DWELL TIME Select the interval time from the day mode to the night mode.
NIGHT BURST Alters the color burst information passed to the video monitor.
COLOR LEVEL 0~20 Adjust the color level value for a fine color tune.
SHARPNESS 0~20 As you increase this value, the picture outline becomes stronger and clearer.
IMAGE FLIP Video output will be flipped (MIRROR-HORIZONTALLY, FLIP-VERTICALLY, ROTATION).
DEFOG AUTO, MANUAL This feature will help increase visibility in extreme weather conditions, such as fog, rain or in a very strong luminous intensity.
3D-DNR OFF, LOW, MIDDLE, HIGH This feature will reduce the video noise at low ambient light.
MOTION This feature will observe the object movement by motion zone and sensitivity that are pre-set with sub menu, DET. SIZE, SENSITIVITY, MASK ACTIVE, WIDTH,
HEIGHT, MOVE HOR, MOVE VER.
SHADING This feature will correct the inconsistent brightness level in the image.
GAMMA This feature will adjust video output brightness (STANDARD, STRAIGHT, LOW, MIDDLE, HIGH).
RESOLUTION Change video output specification. CV350-5X: 1080P25/30, 1080i50/60, 720P50/60, 1080P50/60. CV350-5XB: 1080P29.97, 1080i59.94, 1080P59.94, 720P59.94
USER TITLE The camera title can be entered and it will appear over the video output.
ZOOM MAGNIFICATION Turn On or off of the zoom scale display.
PRIVACY Mask an area you want to hide on the screen with sub menu, MASK NO, MASK ACTIVE, MASK COLOR, WIDTH, HEIGHT, MOVE HOR, MOVE VER, TRANS, RESET
MASK, RESET ALL.
ADDRESS 0~255 Select the camera ID number.
ADDRESS DISPLAY OFF, ON Select the display of camera ID.
BAUDRATE Set the baudrate of RS-485 communication (2400, 4800, 9600, 19200, 38400, 57600, 115200).
LANGUAGE You can select the menu language according to your requirements. ( ENGLISH, 简体, FRANÇAIS, DEUTSCH, ESPAÑOL, PORTUGUÊS, РУССКИЙ)
DEFECT ADJ Defective pixels can be corrected.
VER. Display the firmware version.
RESET Reset the camera settings to the factory defaults.
EXIT Exit the setup.
WB
CONTROL
EXT
IMAGE
CONTROL
DISPLAY
CONTROL
AE
CONTROL
(EXPOSURE)
FOCUS MODE
FOCUS
CONTROL
WDR/BLC
ECLIPSE
BACK LIGHT
AUTO