Marshall Electronics VAC-12HS - Manual (Page 3)

INTRODUCTION
FEATURES
Supported high-definition (HD) formats:
NTSC [email protected], PAL 625@50, 720p@50,[email protected], 720p@60,
1080i@50, [email protected], 1080i@60, [email protected], 1080p@24,
1080p@25, [email protected], 1080p@30, 1080p@50, [email protected],
1080p@60
Bit Rate: 2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps
Auto 3G/HD/SD-SDI detection
Support HDMI Deep Color
Two SDI compliant outputs
External DIP Switch Configuration
The VAC-12HS HDMI to 3G/HD/SD-SDI Converter provides a professional way
to convert HDMI to 3G/HD/SD SDI in real time. The conversion between SDI
and HDMI is purely digital and guarantees no loss of video and audio signal.
Audio is supported.* The VAC-12HS also provides two low jitter SDI outputs for
daisy chain or multiple monitors. With the use of VAC-12HS, the most popular
uncompressed video interface in the consumer world is readily available for
professional SDI equipment!
*SDI supports 48KHz. Dolby True HD and DTS HD are not supported in SDI.
1
HDMI Cable
SDI Cable SDI Cable
Front Rear
POWER
SIGNAL
HDMI OUT
+ 5V DC
Local monitor with SDI input Local monitor with SDI input
SDI OUT 1 SDI OUT 2
MODE