MCZ Magritte - Manual (Page 12)

INSTALLATION AND USE MANUAL Chapter 3
MAGRITTE page 12
Chapter 3 Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.5. PHASE 4 - ASSEMBLY OF INNER AND OUTER SIDES (elements 6,7,8,9,10)
Dry position the inner and outer sides as shown in the figures.
N.B. Before proceeding with final fastening, check the position of the two outer sides with respect
to the ledge. They must be flush with it. The outer sides can be adjusted so as to correct any
discrepancies (of a few mm) which would make give the cladding an unpleasant appearance.
360
PARETE
200
INCAS
S
O
23
0 80
70
10
50
50
6
2
5 (484
)
260
80
ALLINEATI
(ECCETTO
COMPENSAZIONI)
80 (0) 1028 (1350) 470 80
N.B. ( ) QUOTE MAGRITTE FORMA PURO95
1658 (1900)
MURO PERIMETRALE
MURO
P
E
RIM
E
TRA
L
E
42
MURO PERIMETRALE
800
N.B. The version for Forma98 does not include element 2 (
lh side riser) and element 1 (centre riser)
rests against the wall (flush, laterally, with elements 4 - fire bed-, 7 -lh outer side - and 10 –Ledge-).