Eureka 63 - Manual (Page 6)

6
Assembly
NOTE: Dust cup filter must be used when operating the hand vac.
1. To open the dust cup, push release button and
pull dust cup away from cleaner. Verify that the
dust cup filters are inside, then reattach the dust
cup to the hand vac.
2. To attach the cleaning brush or
crevice brush to the hand vac, push
brush into the suction hole, as
shown.
3. To use the flexible hoses, push the end of the hose into the suction hole, then attach
the desired brush to the other end of the flexible hose, as shown. Only one end of the
hose fits into the hand vac.
To use the carrying strap attach the strap to the connection on the hand vac.
Dust Cup
Carrying Strap
Connection
Release
Button
Filters
4. The long flexible hose and wands allow you to use the
floor nozzle. Push the long flexible hose into the dust cup
opening. The floor nozzle will fit directly onto the end of
the long flexible hose or you can add any combination of
the three wands for a comfortable working position. Only
one end of the long flexible hose goes into the dust cup
opening.