Electrolux LAVATHERM 32600 - Manual (Page 29)

Something not working?
29
Something not working?
If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling an engineer.
Symptom Possible cause Solution
The tumble dryer will not start
The appliance is not
plugged in
Plug in the appliance
The fuse has blown Check the fuse
The
X STARTbutton has
not been pressed
Press the
X START
button
No programme has been
selected Select the required
programme
The door is not properly
closed
Close the door
The results are unsatisfactory
The wrong programme
has been selected Select a different
programme
Fluff filter blocked Clean the fluff filter
The tumble dryer has
been overloaded
Observe the maximum
loads stated for each
programme
Laundry not sufficiently
spun prior to tumble
drying Ensure the wash load is
well spun before tumble
drying
The drying process takes
unusually long
The vent hose may be
obstructed Check the vent is not
blocked or squashed
Fluff filter is clogged Clean the fluff filter
The door cannot be closed
Fluff filter has not been
inserted correctly and/or
the filter lid not closed Replace the fluff filter
and ensure the filter lid is
closed