Powerfix PTSI 9 A1 - Manual (Page 15)

12 PTSI 9 A1
GB
IE
NOTICE
► With a low battery the accuracy of the temperature
display is limited.
Troubleshooting
In this section you will receive important information for the
localisation and remedying of malfunctions.
Malfunction causes and remedies
The following table will help with localising and remedying
minor malfunctions:
Defect Possible cause Solution
The display
is blank.
The battery is in-
correctly inserted.
Insert the battery as
per the markings on
the battery cover.
The battery is
discharged.
Insert a new battery.
In the
display
appears the
Indicator „ErOL“.
The measured tempera-
ture is too low.
Repeat the measure-
ment at a diff erent
location.
In the
display
appears
the Indicator
„ErOH“.
The measured tempera-
ture is too high
Repeat the measure-
ment at a diff erent
location.
NOTICE
► If you cannot resolve the problem with the above steps,
please contact Customer Support (see section
Service).