Powerfix PHG 2500 B2 - Manual (Page 35)

32 PHG 3000 B2
GB
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
Operating switch
The operating switch 2 has 4 positions and switches the ventilator and the
heating levels on and off .
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
Temperature regulator
The temperature regulator 3 is steplessly adjustable.
By turning it clockwise a higher temperature is set, by
turning it anti-clockwise a lower temperature will be set.
Heating operation
♦ Ensure that the operating switch 2 is at position 0 (off ).
♦ If the appliance is being taken into service for the fi rst time or if you want
to reset the desired temperature, turn the temperature control
3 to the
MAX position.
♦ Set the operating switch 2 to the desired operating mode.
Setting the temperature
♦ Turn the temperature regulator 3 fi rstly to the Max position.
♦ When the room has reached the desired temperature, slowly turn the
temperature regulator
3 anti-clockwise until a slight click sound is heard.
This means that the heating element is now switched off .
♦ The heating element is now switched on and off automatically by the
thermostat and the temperature is kept constant.
NOTICE
► The ventilator continues to run when the temperature regulator has switched
the heating element off . The appliance thus circulates the air in the room
and so determines optimally, if the room. has cooled
IB_90988_PHG3000B2_LB2.indb 32 IB_90988_PHG3000B2_LB2.indb 32 09.07.13 16:50 09.07.13 16:50