Attaching/detaching the gooseneck – Powerfix PEK 2.4 B1 User Manual
Page 12
PowerFix PEK 2.4 B1
10 - English
Attaching/detaching the gooseneck
To detach the gooseneck, turn the screw
connection to the left until it is released. The
gooseneck can then be pulled off by exerting a
little force.
The gooseneck can only be attached in one
direction due to the polarity protection feature.
Insert the polarity protection feature for this
purpose into the slot provided.
The gooseneck can then be screwed on. Turn
the screw connection to the right until it is firmly
secured.
See also other documents in the category Powerfix Measuring instruments:
- Z29948 (41 pages)
- Z29948 (55 pages)
- Z31385A (36 pages)
- Z31385A (50 pages)
- KH 3236 (62 pages)
- KH 3236 (74 pages)
- KH 2927-1 (62 pages)
- KH 2927-1 (87 pages)
- KH 2927-1 (51 pages)
- KH 2927-1 (63 pages)
- KH 2927-1 (52 pages)
- Z22855 (46 pages)
- Z22855 (62 pages)
- Z22855 (42 pages)
- Z22855 (51 pages)
- Z22855 (67 pages)
- Z22855 (50 pages)
- Z22855 (68 pages)
- KH 2927-2 (52 pages)
- KH 2927-2 (73 pages)
- KH 2927-2 (43 pages)
- KH 2927-2 (43 pages)
- KH 2927-2 (53 pages)
- PDM 250 A2 (90 pages)
- PDM 250 A2 (108 pages)
- Z32114 (141 pages)
- Z32114 (106 pages)
- Z32114 (142 pages)
- Z31385A (49 pages)
- PEK 2.4 B1 (64 pages)
- PEK 2.4 B1 (80 pages)
- PBUH 1.5 A1 (36 pages)
- PBUH 1.5 B1 (36 pages)
- PBUH 1.5 B1 (52 pages)
- Z31697A (104 pages)
- Z31697A (78 pages)
- Z31697A (105 pages)
- Z31697B (72 pages)
- Z31697B (55 pages)
- Z31697B (77 pages)
- PTSI 9 A1 (83 pages)
- PTSI 9 A1 (115 pages)
- PTSI 9 A1 (100 pages)
- PEK 2.3 A1 (98 pages)