Before use / operation, Operation setting the time, Programming the time switch – Powerfix EIM-802 GR User Manual

Page 25

Before use

Setting up the outdoor outlet

sockets with timer

Choose a suitable place for the device.
Using the handle

carefully press the device with the ground

spike

first into the ground.

Insert the mains plug of the device into a 230 V, 50 Hz electrical

outlet socket installed in compliance with the regulations and fitted
with an RCD device.

Note: Before first use or after a power cut, set the correct time.

Operation

Setting the time

Turn the timer

clockwise until the arrow of the time indicator

points to the current time.

Programming the time switch

To program the time switch, press the setting pins

for the de-

sired switching time downwards. You can program the device in
this way for any number of switching times.

Before use / Operation

66401_Erdspiess_mit_Zeitschaltuhr_content_HU_SI_GB.indd 27

15.07.11 14:46