Emotiva ERC-1 - Manual (Page 11)

KEY ERC-1 FEATURES
Four (4) independent power supplies to drive each section of the unit separately. This prevents
the different sections from interacting and causing noise. The separate power supplies apply to:
1. CD carriage
2. Digital section
3. Analog section
4. Display
The CD drive mechanism and the digital section of the audio is encased in a steel substructure
that shields it 100% from the audio stages. No noise from the mechanism or digital section can
get into the audio. The ERC-1 features a new, state of the art magnetic loading mechanism, and
uses high-density foam clamps, which eliminates any risk of scratching CD's when used
properly.
The audio board itself is fully isolated from the power supply and digital sections and offers a
fully discrete output stage, capable of producing 7 volts of output (no wimpy 2 volt output here!).
• Slot-load system with halo lighting.
• Lighting has two selectable functions:
o
Default setting: All lights stay brightly lit constantly.
o
‘Dim’ setting: Dims the display light, and turns off the halo light and all the front
panel buttons except the On/Standby button. Halo lighting will occur when CDs
are ejected. Activate this mode by pressing the ‘Dim’ button on the ERC-1 remote.
• 12 volt trigger for automatic turn on with other sources
• Remote control
11