Preparation for use, Operations – Emerson EWT1921 User Manual

Page 3

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

Connect the power cord to a standard AC outlet.

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears
on the TV screen.

Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".

Select "ENGLISH" or "ESPAÑOL" = Spanish by using
the VOL(ume) ▲ or ▼ button.

Press the MENU button to exit the menu.

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button.
To preset a channel or to change a preset channel, follow the procedure below.

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears
on the TV screen.

Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.

Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".
Then, press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in
your area.

●

The TV distinguishes between standard TV channels
and cable channels.

●

When AUTO MEMO action is completed, the lowest
memorized channel reappears on the screen.

●

When you press the CH(annel) ▲ or ▼ button after
selecting AUTO MEMO, the tuner will stop at the memorized
channels only.

●

The TV may recognize TV channels to be CATV channels
by the receiving conditions. In this case, try AUTO MEMO action again
in the fine receiving conditions.

[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".

Then, press the VOL(ume) ▲ button.

3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the

channel you wish to put into memory or to erase from memory.
Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.

●

Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.

●

Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]

ADD/DELETE
AUTO MEMO

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]

OPERATIONS

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▲ or ▼ button.
3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time with pressing the SLEEP

button on the remote control repeatedly. The timer is set up
to 90 minutes, 10 minutes each time the SLEEP button is
pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP
button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.

You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) ▲ or ▼ button to point

to "CAPTION".

3) Press the VOL(ume) ▲ or ▼ button to select

the mode you wish.

4) When done, press the MENU button to exit

the menu.

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ C1]

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ C2]

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ T1]

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ T2]

: Press the VOL(ume) ▲ or ▼ button.

GAME MODE
Set to the most suitable position for TV
GAME.

[+] : ON
[ - ] : OFF

BRIGHT
Adjust until the whitest parts of the picture are
as bright as you prefer.

[+] : increase brightness
[ - ] : decrease brightness

CONTRAST
Adjust to increase or decrease contrast.

[+] : increase contrast
[ - ] : decrease contrast

COLOR
Adjust to be brilliant or pale color.

[+] : be brilliant color
[ - ] : be pale color

TINT
Adjust to obtain natural skin tones.

[+] : greenish tone
[ - ] : reddish tone

Notes:

●

In the above steps, the picture adjustment
display will disappear from the TV screen
after about 10 seconds unless you press any
buttons, even though you may not be fin-
ished. Press the MENU and VOL(ume) ▲
button so that "PICTURE" is selected. Then,
press the CH(annel) ▲ or ▼ button repeat-
edly until the display returns to the screen.

●

If you adjust the other Picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically. If you
want to set the Game mode, reset it to [ON].

PICTURE ADJUSTMENT

1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the

VOL(ume) ▲ or ▼ button.

[-]

GAME MODE

[+]

OFF

[-]

BRIGHT

[+]

[-]

CONTRAST

[+]

[-]

COLOR

[+]

[-]

TINT

[+]

: Press the CH(annel) ▲ or ▼ button.

PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]

L1403.QX33 01.2.1 8:30 PM Page 3