Storage, Replacing shaving foils/cutter blocks – Silvercrest SFR 36 A1 User Manual
Page 54

52 GB
NOTE: to ensure a consistently smooth
shave, the device must be cleaned and
maintained regularly.
Cleaning after every dry shave
1. Press both release buttons4 and take
off the shaving foil frame2.
2. Tap the shaving foil frame2 carefully.
3. Clean the cutter blocks12 with the
cleaning brush14.
4. Place the shaving foil frame2 on the
device in such a way that it locks into
place.
Cleaning after every wet shave/
occasionally after dry shave
1. If necessary, wipe the device (not the
shaving foils1) with a slightly mois-
tened cloth.
2. Press the release button9. The shaving
head3 opens up.
3. Hold the device facing down and rinse
the cutter blocks12 and the shaving
foil frame2 in the shaving head3 un-
der running water.
4. Allow the parts to dry completely.
• Depending on the intensity of usage,
but at least every 6 months, carefully
spread a small amount of sewing ma-
chine oil on the shaving foils1, the cut-
ter blocks12 and the long hair
trimmer11.
8. Storage
DANGER! Keep the device out of
the reach of children.
• When the device is not being used,
place the protective lid10 on the shav-
ing head3.
• The device and accessories can be
stored in the storage bag15.
9. Replacing shaving
foils/cutter blocks
WARNING! Do not use the device if the
shaving foils1 are damaged.
NOTE: replacement shaving foils and cut-
ter blocks can be ordered:
-
on www.hoyerhandel.com
-
or at the service centre hotline (chapter
"Warranty of HOYER Handel GmbH" on
page 55)
The shaving foils1 and the cutter blocks12
must be replaced, …
… when you can see signs of damage,
… when you feel pinching when shaving
or if the shave is not close, and if this is
not remedied by oiling of the shaving
foils1 and the cutter blocks12 (see
chapter "Cleaning and maintenance of
the device" on page 51) and
… depending on the intensity of use, but
generally after one year.
1. Figure A: press both release but-
tons4 and take off the shaving foil
frame2.
2. Press the release button9. The shaving
head3 opens up.
GB_KRA100057_Herrenrasierer.fm Seite 52 Dienstag, 27. Mai 2014 6:33 18