beautypg.com

Commissioning, Extracting the removable plate – Silvercrest SSMW 750 B2 User Manual

Page 11

background image

8

GB

SSMW 750 B2

Extracting the removable plate

1) Upper removable plate: Slide the locking devices 1 upwards and simul-

taneously tilt the removable plate forward so that you can lift it out from
underneath the lower mountings 3.

2) Lower removable plate: Pull the locking devices 5 forward and lift the

removable plate so that you can pull it out from the rear mountings 6.

Commissioning

Carry out the following procedure with each of the 3 pairs of removable plates.

Smear the non-stick coating on the removable plates with oil suitable for
cooking.

WARNING! RISK OF INJURY!

Let the appliance cool down before exchanging the removable plates!
Risk of Burns!

Install a pair of removable plates into the appliance.

Insert the plug into a mains power socket.

Close the appliance and lock it with the lid locking device 0.

Let the appliance heat up for about 10 minutes.

NOTICE

With the fi rst usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
suffi cient ventilation. For example, open a window.

Disconnect the plug and allow the appliance to cool down.

Clean the removable plates and the appliance as described in the chapter
“Cleaning”.

The appliance is now ready for use.