Silvercrest SMZCD 400 A1 - Manual (Page 42)

39 SMZCD 400 A1
GB
MT
Safety instructions
DANGER - RISK OF ELECTRICAL SHOCK!
►
Connect the universal food processor only to properly installed
power sockets with a mains voltage of 220 - 240 V ~ and 50 Hz.
►
To avoid potentially fatal risks, arrange for a defective power
plug and/or cable to be replaced at once by qualifi ed techni-
cians or our Customer Service Department.
►
Unplug the universal food processor from the socket if you notice
any faulty operation and when you decide to clean it.
►
Always remove the power cable from the socket by pulling on the
plug, do not pull on the cable itself.
►
Do not crease or crimp the power cable and place the power cable
in such a way to prevent anyone from stepping or tripping over it.
Do not submerse the motor block of the universal food
processor in liquids at any time and do not permit liquids to
penetrate into the housing of the motor block.
►
NEVER subject the appliance to moisture and do not use it
outdoors. If by chance liquids do enter into the housing, unplug
the appliance from the power socket immediately and have it
repaired by a qualifi ed technician.
►
Never grasp the universal food processor, the power cable or the
plug with wet hands.
►
Should the power cable or motor block become damaged, arrange
for the universal food processor to be repaired by a qualifi ed spe-
cialist before using it again. Do not open the motor block housing
of the universal food processor. Should you do so, appliance safety
can no longer be assured and the warranty becomes void.
►
Separate your universal food processor from the mains supply im-
mediately after use. The appliance is completely free of electrical
power only when you unplug it.
IB_96823_SMZCD400A1_LB5.indb 39 IB_96823_SMZCD400A1_LB5.indb 39 06.02.14 10:58 06.02.14 10:58