Silvercrest SMW 800 B2 - Manual (Page 13)

- 10 -
Commissioning
Installation of the appliance
Risk of fire!
This microwave oven is not suitable for installation
in a kitchen cabinet. In closed cabinets sufficient
ventilation for the appliance cannot be assured. The
appliance could be damaged and there would be
the additional risk of a fire!
• Select an even surface offering sufficient space
for the adequate ventilation of the appliance:
Ensure that you maintain a minimum distance
of 10 cm from neighbouring walls/surfaces.
Ensure that the door of the microwave oven
can be opened easily.
Maintain a gap of at least 20 cm above the
microwave oven.
• Ensure that the electrical plug is accessible
without problem, so that in case of danger it
can be easily reached and removed.
• Do not remove the pads underneath the micro-
wave oven.
• Do not block the ventilation slots 5. If you do,
it could damage the appliance.
• Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions to
radio and televsision reception.
Attention!
Do not install the microwave above a cooker or any
other appliance generating heat. Installation in such
a location could cause damage to the appliance and
lead to a subsequent cancellation of the warranty
provisions.
Preparing the appliance
• Remove all packaging materials and any
protective film on the surface of the housing.
DO NOT remove the light grey
flimmer cover plate, which is moun-
ted in the cooking area to protect
the magnetron.
• Insert the plug into a power socket. Use a 230 -
240 V ~, 50 Hz, mains power socket with a
16A fuse. It is recommended that the microwave
oven is powered from its own ring main. If you
are unsure about how to connect the microwave
oven, consult a specialist.
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any
remaining production residues.
Without foodstuffs or accessories (glass plate 3, star
rotator 4 and grill stand t), switch the appliance on
in the mode Grill:
• Press the button Grill 6 once. With this
you select the Grill operation. In the display 1
appears the symbol and the symbol
blinks. This indicates readiness to start.
• Adjust the control dial q to a cooking time of
10 minutes.
• Press the button Start/Quickstart q to start
the grilling process.
Notice!
On the first usage, the generation of light smoke
and a slight smell can occur, this is due to the
production residues. This is unharmful. Provide for
sufficient ventilation. For example, open a window.