Required tools – Silvercrest STW 32 - 60 A1 User Manual
Page 31
GB
29
STW 32 - 60" A1
NOTE
►
Do not install the wall bracket on your own!
►
Diff erent TV sets have diff erent connectivity options for wiring and other
devices. Before installation, check that the required connections will still be
accessible after assembly.
►
Depending on your TV set and the type of mounting, you may not need
the complete mounting kit. It is therefore possible that there may be some
small parts left over even if the assembly has been carried out correctly.
Store these carefully together with these assembly instructions for later use
(sale of the wall bracket, new TV set, etc.).
WARNING
►
Before installation, check the suitability of the proposed wall for supporting
the weight that is to be mounted and ensure that there are no electrical cables,
water or gas pipes or other lines in the wall at the mounting location.
►
Ensure that the supplied wall plugs are only suitable for concrete and brick
walls. If you are unsure about the suitability of your wall, please consult an
expert.
Required tools
Pencil
Drill
Drill bit Ø 10 mm
Phillips head screwdriver
Open-ended spanner SW 13 mm
Open-ended spanner SW 10 mm
Allen key 5 x 5 (supplied)
IB_106956_STW32-60A1_LB2.indb 29
04.12.14 09:52