Silvercrest SBL 44 A1 User Manual
Page 72
70
GB
1. If necessary, remove the plug of the 3.5 mm ste-
reo jack cable
13
from the socket AUX
6
.
2. Push and keep the button pressed
fII
10
until
the Bluetooth connection indicator
1
flashes
blue. An acoustic signal sounds.
3. Switch on the audio device (e.g. smartphone)
and start the Bluetooth connection. The audio
device will now receive the device identifica-
tion "SBL44A1“.
4. Establish a connection to the Bluetooth outdoor
speaker on the audio device. Both devices are
now interconnected. The LED on the device is
lit blue and an acoustic signal sounds.
NOTE: it is possible that audio devices remember
the identification of the device. Thus it is possible
that a new manual connection establishment is not
required while the Bluetooth function is active.
5. Now play a song on the audio device. The
sound is reproduced via the speakers
5
.
BB58%OXHWRRWK/DXWVSUHFKHUB%ERRN6HLWH'LHQVWDJ-DQXDU