Silvercrest STYG 2000 A2 - Manual (Page 11)

8 STYG 2000 A2
GB
Troubleshooting
Defect Cause Solution
The appliance is not
working.
The mains plug is not connected to the
mains power. Insert the plug into a mains
power socket.
The mains power socket is defective.
Use a diff erent mains power
socket.
The appliance is defective.
In this case, contact Customer
Services.
The thermostat 5 has not been correctly
inserted into the socket 1. Push the thermostat 5 into the
socket 1.
The fat is not
running into the
fat drip tray 3. The appliance is not standing level.
Place the appliance on a level
surface.
The indicator
lamp 6 is illuminat-
ing and going out
again frequently.
The appliance is maintaining the set tem-
perature level. To do this, it has to heat up
briefl y every so often.
This is not a defect.
The indicator
lamp 6 does not
illuminate.
The appliance has now reached the set
temperature.
This is not a defect.
The thermostat 5 is not inserted into a
mains power socket. Connect the thermostat 5 to a
mains power socket.
The appliance is defective.
In this case, contact Customer
Services.
If the malfunction cannot be corrected with the above suggestions, or if you have determined that the
malfunction may have other causes, please contact our Customer Service.
IB_109176_STYG2000A1_LB4.indb 8 07.01.15 13:23