Preparing rice that has not been pretreated – Silvercrest SRK 400 A2 User Manual
Page 11
8
SRK 400 A2
GB
5) Now close the lid.
6) Connect the power cable 5 to the socket 8 and insert the mains plug into
the power socket.
7) Switch the appliance on using the On/Off switch 0. The orange control
lamp “
”6 lights up.
8) Press down the function selector switch 7 and cook the rice for the amount
of time specifi ed on the rice packet.
9) When the rice is ready:
–
If you want to eat the rice immediately, disconnect the plug from the
mains power socket.
–
If you wish to keep the rice warm (max. 2 hours), press the function
selector switch 7 upwards.
10) When you have removed the rice, switch the device off at the On/Off switch 0
and pull the power plug out of the mains power socket.
NOTE
►
Some types of easy-cook rice still have to swell after cooking. Always
follow the preparation instructions on the packaging of the rice.
CAUTION - PROPERTY DAMAGE!
►
Use only the supplied plastic spoon to remove the rice r. Other spoons
may cause damage to the anti-stick coating of the cooking bowl w.
NOTE
►
You can insert the plastic spoon r into the bracket q at the edge of the
rice cooker. This is always ready to hand!
Preparing rice that has not been pretreated
NOTE
►
Coat the inside of the cooking bowl w evenly with a little fat or vegetable
oil to achieve a better cooking result.
1) Open the lid by pressing the release 2 and lifting the lid simultaneously.
IB_109177_SRK400A2_LB4.indb 8
IB_109177_SRK400A2_LB4.indb 8
09.01.15 09:46
09.01.15 09:46
DIN A5 148 mm x 210 mm