Silvercrest SFE 450 C1 - Manual (Page 8)

- 5 -
Assembling and operating the
appliance
• Thoroughly clean all component parts as descri-
bed in the section "Cleaning and care" before
using the appliance for the first time.
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
o ,
- to the left, the container for fruit pulp and
vegetable mash s .
- to the right, the outlet pipe for the juice y .
Warning:
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice container t on the appliance
base u , so that the three detents and the juice
outlet y are securely engaged in the recesses.
2. Place the filter d on the drive shaft f and press
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
3. Slide the container for fruit pulp and vegetable
mash s from below under the ejection shaft
(see fold-out page).
4. Place the housing lid e on the juice container t
so that the loading shaft w is seated
above the cutters in the filter d .
5. Ensure that the housing lid e is seated firmly in
the recesses of the juice container t . Lift the
clasps r and clip them into the notches on the
housing lid e .
6. Press the lower part of the claps r ragainst the
appliance until they engage.
7. Push the foam separator plate in the separate
juice collector h and then put the lid on. Place
the separate juice collector h next to the appli-
ance so that the juice outlet y projects into the
juice collector h .
8. Insert the power cable with plug i into the wall
socket.
Preparing the fruits/vegetables
• Important: Use only well ripened fruit, as other-
wise the filter d could become quickly blocked.
This would require repeated cleaning of the
filter
d .
• Wash or peel the fruits/vegetables that you wish
to process.
• Large seeds or stones should always be removed
before filling the appliance.
• Stone fruit (such as apples, pears) can be pro-
cessed with the skin and seed centres. Remove
all other stones (peaches, plums etc.), all large
seeds (melons etc.) and stalks to avoid possible
damage to the appliance.
• Fruits and vegetables with thick peels (e.g. citrus
fruits, melons, kiwis, beets) must always be peeled
first.
• The main stalk is to be removed from grapes.
• Cut the fruit or vegetables into pieces that are
sized to fit into the loading shaft w .
Note:
Raisins are not suitable for juicing as they contain
too little juice. Rhubarb or other fibrous vegetables/
fruits are not suitable for juicing as the fibres block
the juice extractor.