Silvercrest SHGD 40 B1 - Manual (Page 10)

7
GB
SHGD 40 B1
Technical data
Mains voltage 220 - 240 V ~, 50 Hz
Nominal power 40 W
Protection class
II
Appliance description
1 Display
2 Temperature
button
3 On/Off button
4 Locking device
5 Suspension loop
6 Hotplates
Before straightening
■ The hair should be clean, dry and free of styling products. Excepted are the
special products that support a straightening of the hair.
■ Comb the hair thoroughly before straightening so that there are no knots in it.
Operation
Preparation
NOTICE
► The hotplates 6 must be free from contamination of all kinds. If necessary,
clean them before taking them into use (see chapter "Cleaning").
The appliance is locked, the locking device 4 is pressed in on the side .
1) Insert the plug into a mains power socket.
2) Press and hold the On/Off button 3 until the display 1 is illuminated. The
display 1 shows the programmed temperature. The colour of the display 1
indicates whether the temperature has already been reached:
–
red: the temperature has not yet been reached.
–
blue: the programmed temperature has been reached.