Emerson EWD7004 - Manual (Page 15)

SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
ON
ON
Functions
5 5
– 15 – EN
Hint Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars appear on the
top and bottom of the screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides trimmed.
• Select “16:9 WIDE” if a wide-
screen TV is connected to this
unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “FIELD”, pictures
in the still mode will be stabi-
lized although they will be
coarse due to little amount of
data.
• If you select “FRAME”, pic-
tures in the still mode will be
highly defined due to the out-
put of two fields at the same
time.
DISPLAY Setting
You can change the display functions. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 14.
4 4
or
Select the desired item
B
DISPLAY menu
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the steps
1) to 3) in the “CUSTOM Menu” section on page 14.
4 4
or
Select the desired item
C
AUDIO menu
6 6 To exit the menu
SETUP
TV ASPECT:
(Default: 4:3 LETTER BOX)
See Hint to the right. QUICK
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after
35 minutes of no use.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON 4:3 LETTERBOX
AUTO
ON
OFF
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON 4:3 LETTERBOX
AUTO
OFF
ON
Select the
desired
setting
or
ENTER ENTER ENTER
STILL MODE:
(Default: AUTO)
See Hint to the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON
STILL MODE
AUTO
FIELD
FRAME
Select the
desired
setting
or
ENTER ENTER ENTER
5 5 6 6 To exit the menu
SETUP DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL:
(Default: ON)
Set to “ON” when the unit is connected to a Dolby Digital receiver.
• ON: Outputs a Dolby Digital Signals
• OFF: Convert the Dolby Digital into PCM (2 channel) QUICK
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
OFF
ON
ON
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
ON
ON
OFF
ENTER ENTER ENTER
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
ON
OFF
ON
ENTER ENTER ENTER
Hint Hint
DRC:
• This function is available only
on the discs which are record-
ed in the Dolby Digital format.
DOWN SAMPLING:
• When playing disc with copy-
right Protection, the sound will
be down sampled at 48kHz,
even if you set to OFF.
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
SETUP DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF 4:3 LETTER BOX
AUTO
ON
ON
E5900UD(EN).qx33 03.12.22 11:19 AM Page 15