Switching on /oﬀ / selecting a heat level, Using the attachments, Removing attachments – Silvercrest SWCD 1000 A1 User Manual

Page 55: Large round brush

SWCD 1000 A1

Removing attachments

■

First switch the appliance oﬀ and allow it to cool down..

■

Press the release button “push” 7 and turn the attachment anti-clockwise

■

The attachment can now be removed by pulling it out of the attachment inser-
tion slot 1.

Switching on /oﬀ / Selecting a heat level

■

When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch 3 and select the output level:

–

“0“ The appliance is switched oﬀ

–

“1“ for a reduced air-ﬂ ow strength with heat

–

“2“ for a high air-ﬂ ow strength with heat

■

You switch the appliance oﬀ by sliding the level switch 3 to the position “0”
(= appliance oﬀ ).

■

To ﬁ x the styling, you can use the slide switch Cool Shot 2. The styling will
be ﬁ xed by the cool air stream:

–

During operation, slide the slide switch Cool Shot 2 upwards.
The air ﬂ ow will be cooler.

–

When you want to deactivate the cool air stream, slide the slide switch
Cool Shot 2 downwards.

Using the attachments

Large round brush

This attachment gives the hair more volume or large curls.

■

Wind a slightly damp strand of hair around the large round brush q.

■

Switch the appliance on at level 1 or 2.

■

When the strand is dry, slide the slide switch Cool Shot 2 upwards.
Wait until the strand has cooled.

■

Unwind the large round brush q from the strand.

■

Proceed with the other strands in the same way.

IB_87966_SWCD1000A1_ES_IT_PT.indb 52

08.03.13 09:25