Silvercrest SDM 800 A1 - Manual (Page 24)

- 21 -
• This appliance is not intended for use by individuals
(including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used. Children should be
supervised to ensure that they do not play with
the appliance.
• Very hot steam clouds can escape when opening
the lid. It is thus best to wear oven mitts when
opening the appliance.
• This appliance is neither designed nor intended
to be used with an external time switch or other
separate remote control system.
Preparing the donut maker
Before taking the appliance into use check to ensure
that the appliance, the plug and the power cable
are in a serviceable condition and that all packa-
ging materials have been removed.
First of all, clean the appliance as described in
the chapter "Cleaning and Care".
Lightly grease the baking surfaces with butter, mar-
garine or oil that is suitable for baking. In this way
any production-related residues on the baking
surfaces can be better loosened.
Heat the appliance up with the lid closed:
1. Insert the plug into the power socket.
2 The red operating lamp
q glows for as long as
the plug is in the power socket. The green opera-
ting lamp
q glows as soon as the appliance has
reached the adjusted temperature.
Important!
Take hold of the appliance only at the hand grip e .
The other appliance parts will be very hot.
Risk of Burns!
• Remove the power plug and, with the lid open,
allow the appliance to cool down .
Clean the appliance again as described in the
chapter "Cleaning and Care". The Donut Maker
is now ready for use.
Baking donuts
When you have prepared a dough for the Donut
Maker, one such as those in the recipes given in
this booklet:
Note:
If you have prepared a low-fat pastry, such as curd
pastry, then grease the baking surfaces lightly with
some butter, margarine or oil suitable for baking.
1. Heat the appliance with the lid closed. Insert the
plug into a power socket.
2. As soon as the green operating lamp q glows,
the appliance is sufficiently warmed up!
Note:
It can happen that, during the baking process, the
green operating lamp goes out briefly and then
lights up again. This means that the adjusted tempe-
rature had fallen, the appliance then automatically
heats itself back up to the required temperature.
Important!
Take hold of the appliance only at the hand grip e .
The other appliance parts will be very hot.
Risk of Burns!
IB_86361_SDM800A1_LB2 16.11.2012 11:33 Uhr Seite 21