Protection against overheating, Storage, Trouble-shooting – Silvercrest SLE 420 A1 User Manual
Page 55

53
GB
11. Protection against
overheating
The device has an overheating protection
system.
• The overheating protection system will
switch the device off automatically if
there is a risk of overheating.
• It is then impossible to switch the device
on again for 3 minutes.
• After approx. 3 minutes, the device
starts automatically.
• Check whether external conditions
could have triggered the overheating
protection system, e.g. temperature
above 35 °C or a closed flap valve 1
over the air outlet.
12. Storage
DANGER for children! Keep the
device out of the reach of children.
• Always store the device in an upright
position.
• Select a location where neither high
temperatures nor moisture can affect the
device.
13. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock! Do not attempt to repair
the device yourself under any cir-
cumstances.
Fault
Possible causes/Action
No function.
• Has the device been
connected to the power
supply?
• Check the water level in
the water tank 5.
• Check the position of
the water tank.
• The overheating protec-
tion system has
switched the device off.
Wait for approx. 3 min-
utes.
The dehumid-
ification
does not
seem to be
working very
well.
• Are the filters 24, 25
dirty?
• Is the air inlet 8
blocked?
• The temperature is low.
• Is the device operating
in AIR CLEAN mode?
No dehumidification
takes place with this
program.
• Is a window open, or
has steam been generat-
ed in the room?
Excessive
noise.
• Is the device standing
on a level, solid sur-
face?
Occasion-
ally the
device stops
working.
• Room temperature
above 35°C?
• Room temperature be-
low 5°C?
• Defrosting mode is ac-
tive.
Damp cloth-
ing is not
drying, or is
only drying
very slowly.
• Is the air flow from the
device directly pointed
at the damp clothing?
• Is the room temperature
too low?
__RP89301_B5.book Seite 53 Sonntag, 21. April 2013 3:33 15