Disposal, Technical specifications – Silvercrest SLE 420 A1 User Manual

Page 70

68 GB

14. Disposal

The symbol showing a wheel-
ie bin crossed through indi-
cates that the product requires
separate refuse collection in
the European Union. This ap-
plies to the product and all ac-
cessories marked with this
symbol. Products identified with this symbol
may not be discarded with normal house-
hold waste, but must be taken to a collection
point for recycling electric and electronic ap-
pliances. Recycling helps to reduce the con-
sumption of raw materials and protect the
environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

15. Technical

specifications

Subject to technical modification.

The dehumid-
ification
does not
seem to be
working very
well.

• Are the filters 24, 25

dirty?

• Is the air inlet 8 blocked?
• The temperature is low.
• Is the device operating

in LUFTREINIGUNG
mode? No dehumidifi-
cation takes place with
this program.

• Is a window open, or

has steam been generat-
ed in the room?

Excessive
noise.

• Is the device standing on

a level, solid surface?

Occasion-
ally the
device stops
working.

• Room temperature

above 35°C?

• Room temperature be-

low 5°C?

• Defrosting mode is ac-

tive.

Damp cloth-
ing is not
drying, or is
only drying
very slowly.

• Is the air flow from the

device directly pointed
at the damp clothing?

• Is the room temperature

too low?

Fault

Possible causes/Action

Model:

SLE 420 A1

Mains voltage:

220 - 240 V~ 50 Hz

Protection class:

Input power:

320 W (27°C 60%)

Power rating max.: 420 W

(35°C 90%)

Nominal current:

1,39 A (27°C 60%)

Power consump-
tion:

max.1.82 A
(35°C 90%)

Dehumidification
capacity:

20 L /day (30°C 80%)
11 L /day (27°C 60%)

Air flow:

195 m

Coolant /
Volume:

R134a/190g

Coolant group:

Water tank:

5 l

Room size:

20m

‚ (Rh. 2.3m)

Room
temperature:

5 - 35°C

Weight:

12.5 kg

Dimensions:

360 x 230 x 610
WxDxH

Noise level:

48 dB(A)

Intake pressure:

0,5 MPa

Exhaust pressure: 1,5 MPa

GB_RP89301_Luftbefeuchter.fm Seite 68 Freitag, 19. April 2013 9:13 09