Silvercrest SSB 1.0 A1 - Manual (Page 2)

Technical data
Model Portable USB charger SSB 1.0
A1
Dimensions (diameter x H) 54 x 29 mm
Weight
40 g
Connection input USB-A plug
Connection output USB-A socket
Input voltage 5 V
Input current 500 mA
Output voltage 5 V
Output current 1000 mA
Battery capacity 1000 mAh
Compatibility USB 2.0, USB 1.1
Temperature 10 - 35 °C
Air humidity (rel. humidity) Max. 85 %
Troubleshooting
Problem Cause, action
A connected device is
not charged
 Press and hold the POWER button
[1] for at least 5 seconds to start the
charging process.
 The portable USB charger battery is
empty: recharge the battery.
 No USB connection to the device:
check the USB connection .
 The charging current is lower than
160 mA. It is not possible to charge
devices with a charging current
lower than 160 mA.
 Some devices, especially mobile
telephones, require a special USB
charging cable which you can buy
separately. This is not a malfunction
of the portable USB charger.
 The connected device is faulty or
cannot be charged via USB
The portable USB
charger is not being
charged  No USB connection to power
source: check the USB connection.
Warranty Information