Silvercrest SRHT 1500 B2 - Manual (Page 9)

- 7 -
Operation
• Fold the travel hair dryer q open until the grip e palpable locks in.
Caution! Property damage!
Always set the voltage selector on the hairdryer q to the rating of
the local electrical power supply, if you do not, the appliance could
be damaged.
• Adjust the voltage selector t with a coin, until a click is heard.
Make enquiries about the rating of the local electrical mains
supply with the energy supplier or with the hotel personnel.
• Insert the power plug into a wall power socket.
• Fit the styling nozzle
i onto the front of the travel hair dryer q :
Ensure that the plastic latches on the styling nozzle i grip into
the guides on the travel hair dryer q . Turn the styling nozzle i
until it engages and sits firmly.
Turn the styling nozzle
i in the other direction and remove it by
pulling it to the front if you wish to use a broader stream of air.
• Switch the travel hair dryer q on with the operating switch r .
The travel hair dryer q is fitted with a three-position switch: "0" (Off),
"1" (gentle airflow, warm) and "2" (strong airflow, hot).
In the event of overheating, the travel hair dryer
q automatically
switches itself off.
IB_71363_SRHT1500B2_LB4.qxd 17.11.2011 11:58 Uhr Seite 7