Silvercrest SRHT 1500 B2 - Manual (Page 40)

- 38 -
Travel Hairdryer
Safety instructions
Reduce the risk of electric shock
• Connect the travel hair dryer only to correctly installed mains power
sockets with a current rating of 120/230 -240 V~ at 60/50 Hz.
Under no circumstances may the appliance be submersed in
fluids or fluids be allowed to permeate the housing.
• Do not expose the appliance to humidity and do not use it outdoors.
Should liquids enter the housing, unplug the appliance from the
power socket immediately and have it repaired by a qualified
technician.
• As additional protection we recommend the installation of a residual-
current-operated protective appliance with a rated tripping current
of not more than 30 mA in the bathroom circuit.
Ask your electrician for advice.
• In the event of operating malfunctions and before cleaning the
appliance, remove the plug from the wall socket.
• To disconnect, always pull the plug from the power socket, do not
pull the power cable.
IB_71363_SRHT1500B2_LB5.qxd 17.11.2011 11:50 Uhr Seite 38